I have received some compliments and comments on my photos so I figured that others might benefit from a setup like mine. I have a standard inexpensive digital camera and nothing special in terms of equipment. I should start by saying that I am a voracious scratchbuilder (on a budget too), so my setup is also very affordable and easily assembled at any hardware store. I am not a pro, so my terminology may not be pristine. Real photographers, my apologies.
Equipment Canon s100 Elph Digital Camera – 200.00 (used eBay)
This camera is an excellent choice for model photography and an incredible bargain. While it will NOT capture the individual pores in your skin, I find that level of macro is rarely useful in model photography. Most folks (excepting the McVey’s, Haley’s and Wong’s) do not want a 1024×768 shot of their models eye. It wouldn’t be flattering Everyone has a favorite choice and camera geeks make computer nerds look tame by comparison…;-0
The camera I use in shooting the tutorial is my Elph. I also use my digital camcorder on occasion.
Lightweight Tripod – 40.00 (Best Buy)
Look at all that they have and buy the cheapest one that will be relatively steady. You should shoot with the timer on the camera so steadiness is not that critical as you won’t be touching the tripod while the shot is being exposed.
2 Pipe Clamps – 20.00 each (hardware store)
½” pipe clamp heads and a 60” length of black pipe creates these versatile clamps that have about a million uses besides model photography. These are the verticals for mounting lights in our lighting setup.
3 Shop Lights w/clamps – 5.00 each (hardware store)
Cheap aluminum clamps lights with shades. The shades help focus the light on the model and the matte aluminum finish helps to diffuse the light and eliminate hotspots.
6 Reveal Bulbs – 1.00 each (hardware store)
These bulbs are quite good at simulating daylight. They are cheap and replaceable. They do have a noticeable pinkish hotspot, but rotating the spot off your model is pretty easy and it doesn’t show up much against the background.
Adjustable Model Stand – Scratchbuilt
I built this so I had a stable platform to shoot models on. I wanted it wide enough that I could move the model all around to get the right angles. I curved the leading edge so my camera/tripod could move around it easily and still maintain a 4in macro range. Another tripod with the L-shaped piece attached to the top would work well too.
Base can be a piece of plywood (12”x12”), vertical can be a 2×4 (24”-36”) and the L-shaped top two more pieces of plywood (8”x8” each). Glue the base onto the end of the 2×4 and run a couple of 2” drywall screws through the base and into the 2×4 to secure it tightly and let dry. Glue and screw the L-shaped piece together and let dry. Glue and screw the L-shaped pieced onto the top of the 2×4 and let dry. Voila! Instant model stand.
Get as fancy as you like, but here is the most basic version.
ade Backdrop Photoshopped on Matte Inkjet Paper
Use your image editing software to create a gradient that is full page sized to print out as a backdrop. I like blue because it tends to brighten the appearance of the photo, but you can use whatever color you like. I would avoid reds, oranges or other super bright colors as they may distracting from the model. My gradients run saturated blue to white on an 8.5×11 sheet (11×17 is better, but my printer won’t do it). The top 25% is pure blue, the bottom 25% is pure white and the middle is a gentle gradient. Print this on good matte paper or card stock and it will last a long while.
Tip: If you know someone with a color laser printer or Fiery printer at work, ask them to rip one for you. These printers can usually handle 11×17 paper and print at a much clearer quality.
1. Find a open place to work where you can connect to power easily and without tripping over a bunch of wires. Trust me. When you snag a cord and it brings down your lights, camera and painstakingly painted models you will curse, LOUDLY.
2. I use the end of a table and place my tripod as close to the edge of the table as possible and my model stand just beyond that. I put pipe clamps on either edge of the table and tighten them down securely. Attach the clamp light to the upright pipes.
3. Adjust the lights to flood the area with light. It will look really bright but trust me too much light is rarely a problem as long as you adjust the exposure on the camera to compensate. With this setup I am still setting to a positive value for exposure. Just goes to show that as bright as this seems…it ain’t that bright.
4. When taking your shot dont worry if it does not fall dead center in your screen. You will probably crop the photo in the end. Try to think of the cropped shot you will end up with and try to take the best framed shot of that. This is easier on colored backgrounds than on photos or landscapes as things do not need to line up. Practice and learn.
Place your model and line up the pMiniature Photography – Page 1review screen. I never use the view finder. Mark the stand where you model is placed. This makes it easy to remove your model and then place it back at the same point. A number of issues might arise that cause you to move the model: shadows/hotspots, dramatic angle, autofocus sensor not aligned, etc.
5. Set your camera to macro mode, turn off your flash, check your exposure settings, frame your model, set the timer, take your shot. Ahhhhh Art….Now it belongs to the ages!
Camera Specs and Settings
Macro – 4in this is more than enough for amateur model photography. Serious photographers will disagree, but the point for me it to get good shots on the cheap.
Zoom – Who cares? I do not use zoom as it typically degrades the Danny Grimes Gallery