Welcome to Librarium Online!
Join our community of 80,000+ members and take part in the number one resource for Warhammer and Warhammer 40K discussion!
Registering gives you full access to take part in discussions, upload pictures, contact other members and search everything!
Anyone knows where to find old Rhino assembly Guide ?
IIRC you need to be a little careful when sticking the tracks onto the hull to make sure they are level, and some people mess up the main body (the bits marked x on the picture are supposed to overhang, not butt up against the hull).
It's pretty straightforward though.
The tracks are molded on to the old Rhinos.
I have 2 standard sprues - no problem there, and accessories sprue - with spotlight, bulldozer blade.
Also on it antenna , stormbolter with hatch, smoke launcher, rocket with launcher
what I can't understand is how flamer attached and what are parts # 15, 14 ,20 on Frame A
The Mk1 rhino had two identical hull pieces, a pair of two-part sides/tracks, two hull top/bottom hatches, two front/back hatches, one angled front/back hull cover, two light fixtures (flat plates with circular holes), two antenna, two railings, two pairs of smoke stacks, two flat circular hatches, two bolter cupolas and bolters, two stowage boxes, smoke launchers, side doors, and a two-part dozer blade assembly.
edit - if you can post a picture we might be able to identify it.
Last edited by A.T.; February 26th, 2012 at 11:29.
That's not problem for me
i have alot of those tanks, A.T. is right. the extra sprue with dozer and siderocket came with the heavy support versions of it. So that vindicator also had the sprue. Some stuff doesnt make sense if you have only a Rhino version.
14 is an ammobox that could be used to make the tank look different, or just glued to the side of one of the guns.
The flamer was 'perfect' fit for a sidesponson, so if you had 2 of those sprues (that meant buying 2 tanks) then you could get one of your predators/ annihilators to fit with flamer sidesponsons. not meant for the Rhino
15 went in the side of the hatchet mounted stormbolter. (another ammobox- its in the picture posted above)
note that the hatchet mtd bolter is different size than the open rounds at the top of the Rhino. It's actually meant for the top of the gunturret of a vindicator, predator or annihilator.
not sure what 20 was... what does it look like? :p
Last edited by Digger; February 26th, 2012 at 11:17.
Warchief Diggah o da Bloodmoon Squiggahs