Welcome to Librarium Online!
Hi guys, i could use some advice.. have a look at this Troll he's going to lift that banner, but it needs more flag near his right hand (on the left side of the picture)
he will clutch the banner's cloth in his hand, im not sure if greenstuf alone will be strong enough, To make it fit, a large part of banner has to be added and it will probably be thin
Is greenstuff the best way to start?maybe some extra glue to hold it? Or is there better stuff to do the most?any advice would be greatly appreciated.
Warchief Diggah o da Bloodmoon Squiggahs
Roll out a thin layer of brown stuff or similar on a non stick surface first. (Brown stuff is stronger than green stuff.) Once it is completely set, you can peel it up and cut it to shape. Then glue it into place using super glue and wait for that to dry. Then use green stuff over the face of it to add the folds in the fabric. I would recommend some size 0 color shapers in either grey or black.
Color shapers are great tools for shaping green stuff, but they're not very pointy. They're usually used to make smooth surfaces or fabrics out of green stuff. Color shapers come in 3 colors, white, grey, and black. The darker the color of the tip, the harder the rubber is.
Try to use a tiny amount of water on your tools with the green stuff. Water will prevent the green stuff sticking to things when you don't want it to.
I've also heard a tiny bit of Vaseline works too. I, however, use saliva. I know it's gross, but it's what I do.