Welcome to Librarium Online!
Join our community of 80,000+ members and take part in the number one resource for Warhammer and Warhammer 40K discussion!
Registering gives you full access to take part in discussions, upload pictures, contact other members and search everything!
How would i make the peg on the flight base stronger, or what kind fo peg should i use if that doesn't work.
I know it's not really a "conversion" persay, but i didn't know where else to put it.
You could try pinning the talos to the stand; you should drill the pinning wire quite deep into the stand however to give the entire shaft added strength (no inappropriate jokes please). If you dont like this idea, you could replace the stand alltogether with some thick metal tubing, or a nail cut to size. I've tried all the above (on heavy BFG battleships mainly) and thay all work well.
Hope this helps
two common solutions,
1) clip the very top nub off the flight base and drill the hole in the bottom of the talos out to fit. Glue as needed.
2) drill a very small hole in the top of the plastic flight base and glue in a brass pin (or bit of paperclip. drill same diameter hole inside the existing talos flightbase hole. glue as needed.
Doh! rp252 beat me to the punch
Last edited by artificer; June 7th, 2006 at 01:12.
Baby, when I'm the voice of reason, we've got problems!~artificerSomeone should stop
Jervis "let's make it easy enough for a 3 year old to play" Johnson
before he turns 40k into checkers~anon
i'll try the nail idea when i find the time, thanks a lot.Originally Posted by rp252
Don't use plastic. Use a sturdier brass pin or do away with it entirely and glue it directly to the flying base (after you rubble and flock the base.)
And over there we have the labyrinth guards.
One always lies, one always tells the truth, and one stabs people who ask tricky questions.