Ultimate Imperial Guard Vehicle Conversion Guide - Warhammer 40K Fantasy
 

Welcome to Librarium Online!

Join our community of 80,000+ members and take part in the number one resource for Warhammer and Warhammer 40K discussion!

Registering gives you full access to take part in discussions, upload pictures, contact other members and search everything!


Register Now!

User Tag List

+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Member orkstomper09's Avatar
    Join Date
    Aug 2006
    Location
    Fairfax
    Age
    26
    Posts
    76
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Reputation
    -7 (x0)

    Ultimate Imperial Guard Vehicle Conversion Guide

    This is the new Ultimate Imperial Guard Vehicle conversion guide by myself, Orkstomper09, done with help from Bobahat. its not quite done yet so Ill have a follow up post later if this does well. Before I start, If you give me reputation points, give some to Bobahat.
    Thanks Bobahat. Well here we go

    Leman Russ: heavy flamer sponsons:
    Materials: Leman Russ box set, 99120105011, SOB Immolator Sprue, 99390108001
    1. assemble leman Russ kit as normal except for sponsons
    2. Glue halves of bolter sponsons together
    3. remove bolter fronts, save round pieces remaining
    4. Get Flamers from immolator sprue
    5. remove back half after pipes on the side
    6. glue the flamer parts produced to the round parts saved
    7. assemble the rest of the housing as normal
    8. file if movement of sponson is impaired
    9. file off all SOB markings

    Leman Russ Demolisher
    Materials: Leman Russ box set, 99120105011, SOB Immolator Sprue, 99390108001, Empire cannon Sprue 2, 99390202002

    Instructions:
    1. assemble leman Russ kit as normal except for turret and sponsons
    2. Glue halves of bolter sponsons together
    3. remove bolter fronts, save round pieces remaining
    4. Find multi meltas from the immolator sprue
    5. file flat after storage tank
    6. attach to round pieces saved
    7. assemble the rest of the housing as normal
    8. file if movement of sponson is impaired
    9. get empire mortar from sprue
    10. glue halves together
    11. file off all markings
    12. find turret pieces
    13. test fit of mortar in place of battle cannon
    14. If needed, file down to fit
    15. once fit, assemble the rest of the turret as normal
    16. attach to tank


    Salamander command vehicle
    Materials: chimera boxed set, 99120105013; Cadian heavy weapons team box set,
    99120105012, Chaos Vehicle Accessory Sprue, 99390102004, Plasticard
    1. assemble tracks as normal
    2. glue front compartment to base
    3. glue back extender onto base
    4. glue tracks onto base
    5. create base with plasticard on back ridges
    6. use plasticard to create high walls around new platform
    7. facing the front, cut a viewing slit and gun port in the wall
    8. glue heavy flamer into new port
    9. file off any symbols showing
    10. create crew from parts on the accessory and weapon team sprue
    11. assemble the rest of the tank as normal

    Salamander scout vehicle
    Materials: chimera boxed set, 99120105013; Cadian heavy weapons team box set,
    99120105012, Plasticard
    1. assemble tracks as normal
    2. glue front compartment to base
    3. glue back extender onto base
    4. glue tracks onto base
    5. create base with plasticard on back ridges
    6. use plasticard to create high walls around new platform
    7. facing the front, cut a viewing slit and gun port in the wall
    8. glue auto cannon into new port
    9. file off any symbols showing
    10. create crew from parts on the accessory and weapon team sprue
    11. assemble the rest of the tank as normal

    Leman Russ conqueror
    Materials: Leman Russ box set, 99120105011, Empire cannon Sprue 2, 99390202002

    Instructions:
    1. assemble leman Russ kit as normal except for turret
    2. get empire cannon from sprue
    3. glue halves together
    4. cut at line after two mounting nubs
    5. file off all markings
    6. find turret pieces
    7. test fit empire cannon in place of battle cannon
    8. If needed, file down to fit
    9. once fit, assemble the rest of the turret as normal
    10. attach to tank

    Leman Russ annihilator
    Materials: Leman Russ box set, 99120105011, Space Marine Predator Turret Sprue, 99390199007, green stuff, 99219999005
    Instructions:
    1. assemble leman Russ kit as normal except for turret
    2. get twin linked lascannon from sprue
    3. glue halves together
    4. cut off two mounting nubs
    5. cut off round area
    6. find turret pieces
    7. cut gun mounting off at angle matching cut lascannon plate
    8. glue las cannons to modified turret
    9. If needed, file down to fit
    10. use green stuff to fill in cracks
    11. assemble the rest of the turret as normal
    12. attach to tank

    Leman Russ exterminator
    Materials: Leman Russ box set, 99120105011, 2x Space Marine Predator Turret Sprue, 99390199007, green stuff, 99219999005
    Instructions:
    1. assemble leman Russ kit as normal except for turret
    2. get twin linked lascannon from sprue
    3. glue halves together
    4. cut off two mounting nubs
    5. cut off round area
    6. cut off lascannon barrels
    7. get 2x autocannons
    8. glue halves together
    9. cut off auto cannon barrels
    10. glue 2x auto cannon barrels to lascannon plates
    11. find turret pieces
    12. cut gun mounting off at angle matching cut lascannon plate
    13. glue plate to modified turret
    14. If needed, file down to fit
    15. use green stuff to fill in cracks
    16. assemble the rest of the turret as normal
    17. attach to tank

    Leman Russ Vanquisher
    Materials: Leman Russ box set, 99120105011, Imperial Basilisk Frame E, 99399999045, green stuff, 99219999005
    Instructions:
    1. assemble leman Russ kit as normal except for turret
    2. get earth shaker cannon from sprue
    3. glue halves together
    4. cut off where it reaches chamber area
    5. find turret pieces
    6. test fit cannon in place of battle cannon
    7. If needed, cut and file down to fit
    8. use green stuff to fill in cracks
    9. assemble the rest of the turret as normal
    10. attach to tank

    Destroyer tank hunter
    Materials: Imperial Basilisk Frame E, 99399999045, Imperial Guard Demolisher MK 2, 99140105167, green stuff, 99219999005, plasticard
    1. Assemble the Demolisher hull as normal, but leave off the hull-mounted lascannon and the plating that surrounds it.
    2. Do NOT Assemble turret
    3. For the turret socket, trim down the turret base piece and add the hatch and seal ring
    4. fill in cracks with green stuff
    5. Cut down the Basilisk barrel to an appropriate length.
    6. construct a weapon housing matching the bottom of the hull from plasticard over the lascannon housing
    7. Attach two strips of plasticard on the side track plate to serve as the armor skirt frame.
    8. Cut a sheet of plasticard and give it two vertical v-gouges to show plates
    9. glue armor sheet in place
    10. mount the demolisher barrel (minus bottom plate) on your housing
    11. mount cut cannon onto barrel
    12. fill in cracks with green stuff
    13. use metal back vent
    14. assemble the rest of the tank as normal
    Thunderer siege tank
    Materials: Imperial Guard Demolisher MK 2, 99140105167, green stuff, 99219999005, plasticard
    15. Assemble the Demolisher hull as normal, but leave off the hull-mounted lascannon and the plating that surrounds it.
    16. Do NOT Assemble turret
    17. For the turret socket, trim down the turret base piece and add the hatch and seal ring
    18. fill in cracks with green stuff
    19. construct a weapon housing matching the bottom of the hull from plasticard over the lascannon housing
    20. Attach two strips of plasticard on the side track plate to serve as the armor skirt frame.
    21. Cut a sheet of plasticard and give it two vertical v-gouges to show plates
    22. glue armor sheet in place
    23. mount the demolisher cannon on your housing
    24. fill in cracks with green stuff
    25. use metal back vent
    26. assemble the rest of the tank as normal

    now, as I said this is not done. Here is whats coming next
    hellhound(all plastic)
    hellhound(large back tank)
    Basilisk (missle)
    Griffon (All GW)
    Sentenal (rocket, All GW)
    Sentenal (missle, All GW)
    Chimera (Heavy bolter turret)
    Chimera (auto cannon turret)
    Cyclops (all plastic)
    Hydra(all plastic)
    Manticore (all plastic)

    if anyone would like to submit instructions for these on this thread, PM me

    In the night,
    many stood,
    armed with lasguns,
    and the light of the emporer,
    they stood tall,
    proud,
    in the twilight,
    fighting continues,
    the galaxy burns,
    a cunning tribute,
    to the god of man,
    all hail the Emperer!

  2. Remove Advertisements
    Librarium-Online.com
    Advertisements
     

  3. #2
    Wher dat naked blue chik? Jaffar_Hasad's Avatar
    Join Date
    Nov 2005
    Location
    Michigan
    Age
    27
    Posts
    1,646
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    ReputationReputationReputationReputationReputationReputationReputationReputation
    260 (x6)

    I wouldn't call that Ultimate! Needs pictures. Sure it seems easy when its all words, but I need a visuals because I'm an idiot. Rep to both of you if this happens
    Sleeping, not dead.
    [SIGPIC][/SIGPIC]
    Removed by the moderators.

+ Reply to Thread

LinkBacks (?)

  1. September 24th, 2010, 11:40
  2. September 17th, 2010, 05:32
  3. April 12th, 2010, 17:06
  4. June 11th, 2009, 09:17

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts