Join the #1 Tabletop Gamer Forum Today - Its totally free!

preston · February 22nd, 2008, 13:33

Ive been attempting to scrath buil a thunderbolt fighter, but when ever i score the plasticard so that i can bend it, it has a tendency to break.

Im using 1mm thick, and am not sure what im doing wrong as im new to scatch builds.

Any ideas?

omgitsduane · February 22nd, 2008, 13:39

Don't mark it to bend it, just bend it, it should bend fairly easy, any scores in it will snap it off no matter what size (almost), so just bend it using a rule to make sure the line is straight or something?

Stormchaser · February 22nd, 2008, 13:40

I prefer not to score plasticard. I like to cut it where I need to, then shave down the bit I want to bend, then glue it back into place, This tends to work quite well

You can also try gluing on some paper thin plastic card on both sides to give it extra strength.

SmokWawelski · February 22nd, 2008, 15:26

The cheap and thin plasticard (like FOR SALE signs and such) will bend no problem. If you can't do it with yours, you are using too thick of a material. Nothing more to it....

February 22nd, 2008, 13:33	#1 (permalink)
preston 2nd Company Tac Marine Join Date: Jul 2007 Location: Londinium Age: 21 Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 29	Problem with plasticard <a onclick="pageTracker._trackPageview ('/outgoing/http_d1_openx_org_ck_php_n_a83f474f_amp_cb_46587945173');" rel='nofollow' href='http://d1.openx.org/ck.php?n=a83f474f&cb=46587945173' target='_blank'><img src='http://d1.openx.org/avw.php?zoneid=22572&cb=46587945173&n=a83f474f' border='0' alt='' /></a> Ive been attempting to scrath buil a thunderbolt fighter, but when ever i score the plasticard so that i can bend it, it has a tendency to break. Im using 1mm thick, and am not sure what im doing wrong as im new to scatch builds. Any ideas?

February 22nd, 2008, 13:40	#3 (permalink)
Stormchaser By the Silver Sword! Join Date: Dec 2006 Age: 21 Posts: 566 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 44	I prefer not to score plasticard. I like to cut it where I need to, then shave down the bit I want to bend, then glue it back into place, This tends to work quite well You can also try gluing on some paper thin plastic card on both sides to give it extra strength. __________________ Knights of the Silver Sword: A Chapter A Hero is no braver than the ordinary man. He is just brave five minutes longer.

LinkBacks (?) LinkBack to this Thread: http://www.librarium-online.com/forums/modelling/114294-problem-plasticard.html
Posted By	For	Type	Date
toycutter: How to bend plasticard	This thread	Refback	September 6th, 2008 22:01
toycutter: March 2008	This thread	Refback	July 15th, 2008 04:06

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasticard!!	thewineguy	Modelling	11	September 4th, 2007 19:53
Plasticard?	nekochen	Scenery	6	September 16th, 2006 15:50
Plasticard, plasticard rods in UK	Nurglitch	Modelling	1	April 28th, 2005 20:21
Plasticard, Where Do I Get It?	Terenel Kessen	Modelling	5	October 19th, 2004 20:56

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 22nd, 2008, 13:39	#2 (permalink)
omgitsduane Murder Join Date: Oct 2007 Location: East Melbourne Age: 23 Posts: 2,863 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 52	Don't mark it to bend it, just bend it, it should bend fairly easy, any scores in it will snap it off no matter what size (almost), so just bend it using a rule to make sure the line is straight or something?

February 22nd, 2008, 15:26	#4 (permalink)
SmokWawelski Faith above all Join Date: Dec 2004 Location: Crestwood, IL, USA Posts: 1,556 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 77	The cheap and thin plasticard (like FOR SALE signs and such) will bend no problem. If you can't do it with yours, you are using too thick of a material. Nothing more to it....