Welcome to Librarium Online!
Join our community of 80,000+ members and take part in the number one resource for Warhammer and Warhammer 40K discussion!
Registering gives you full access to take part in discussions, upload pictures, contact other members and search everything!
I have just completed my Tomb Stalker and now find it is top heavy and very hard to mount, does anyone have any idea's how to mount this beast
Pin it to the base. I've put together alot of Forgeworld models and the best advice I can give is to pin and/or greenstuff everything.
I mounted mine by attaching some extra pieces of terrain into the base, then gluing the back legs of the beast into the terrain (not the base itself) and the setting it dry upside down so that the heavy Tomb Stalker was flat on its back while the glue between legs and terrain was drying up. I didn't need to pin it at all and it turned out very stabile now. From the attached pictures you can probably see the small hatch and the remains of hunter-killer missile launcher. The Stalker has one of its legs glued between the hunter-killer missile tube and aiming panel and second leg glued to the side of the hatch. The rest of the hind-side legs are glued to various points of the base. I used plastic glue (not superglue) in quite big chunks and used the static grass later to cover the signs of dried glue.
Last edited by Polaria; January 2nd, 2012 at 12:59.
Revenant Moon Necrons: (W/L/D) 0/1/0 (6th edition: 13/2/2)(5th edition: 14/6/4)(3rd edition Codex: 16/4/7)
XIX Legion: (W/L/D) 0/0/0 (5th edition: 14/12/2)(5th edition Codex: 4/3/0)
Black Legion: (W/L/D) 1/0/0 (6th edition: 2/3/0)
Something Wicked... Reikwald Beastmen: (W/L/D) 10/4/1